Broken Sprinkler?
Landon Can Fix It.
Owner-operated sprinkler repair across Keller, North Richland Hills, Hurst, Watauga, Haltom City, and Southlake. Licensed Texas irrigator. $0 service call fee. $75 per hour labor only. No dispatch, no upsell, no surprise invoices.
Sprinkler repair in Keller from Spray Irrigation Co. costs $75 per hour for labor plus parts (quoted before installation), with a $0 service call fee. Most common repairs — broken heads, failed valves, controller issues — take 30–90 minutes and total $100–$250.
Sprinkler repair in Keller
Keller began as a railroad stop — when the Texas & Pacific line came through in 1881, a 40-acre townsite called Athol was laid out, and within a year it was renamed for John C. Keller, the railroad’s construction foreman. You can still read that history in Old Town Keller, where the depot site, the old water tower, and the original streets remain. From those roots Keller grew into what’s regularly called Texas’s most family-friendly city: top-rated Keller ISD, more than three hundred acres of parks, and twenty-six miles of trails threaded between the neighborhoods. It’s a town that takes pride in how it looks — lawns included.
Most of Keller filled in during the boom from the 1980s through the 2000s, so a typical system here is newer than what you’d find in the older Mid-Cities — often with a decent controller and well-planned zones. The exception is Old Town and the older pockets, where systems go back further. Either way the repair pattern holds: buried pipe lasts, and what fails is the valves, heads, sensors, and controllers, one part at a time.
Cross Timbers soil, not just clay
Keller sits on the western edge of the Eastern Cross Timbers, where the ground runs sandier than the heavy clay of the cities to the east — sandy loam over a clay subsoil. That’s a mixed blessing for a sprinkler system. It drains better and heaves less, so heads tend to stay truer and you see fewer clay-shoved risers. But it also dries out faster, which means watering deep on your assigned days matters more here, and the clay underneath still moves enough to stress lines and foundations through a long dry spell.
What we tend to fix in Keller
On Keller’s mostly-newer systems, the common calls are a single zone that’s stopped (a solenoid or a controller output), nozzles clogged or knocked out of adjustment so coverage drifts, a head cracked by a mower, a wire nicked during landscaping, and rain or flow sensors that have quietly failed. In Old Town’s older systems you’ll see more of the worn-valve and tired-controller work. None of it is usually a whole-system job — it’s finding the part that quit and replacing it.
Keller’s watering rules
Keller holds outdoor watering to twice a week on your assigned days, with no sprinklers running between 10 a.m. and 6 p.m. Hand watering, drip, and soaker hoses are allowed any time, which keeps foundation watering and new plantings legal even on an off day. The city is proud of its parks and green space and takes conservation seriously, so a controller set correctly for your days — and no heads stuck open — keeps you comfortably on the right side of the rules.
Watering deep on a fast-draining lot
With Keller’s sandier soil, the trick is depth over frequency: two deep, early-morning soakings on your assigned days put water down where roots can use it, instead of a daily sprinkle that runs through the top few inches. In summer, finish before the 10 a.m. cutoff. And before the first hard freeze, bring the system down — drain or insulate the backflow and shut off the supply — because a North Texas freeze will crack a brass assembly left full of water. A spring start-up check then catches anything the winter split.
Licensed, to code, signed off
Any work that connects to your home’s drinking water — valves, backflow, a new zone — has to be done by a licensed irrigator under Texas law, and the backflow assembly needs testing by a licensed tester. Spray Irrigation Co. is owner-operated by Landon Melvin, Texas Licensed Irrigator LI0031476, so repairs and backflow work are done to the state standard and signed off properly — which also matters when a Keller home goes through inspection at resale.
Landon covers Keller from North Richland Hills just to the south — quick up Davis or Rufe Snow, whether you’re near Old Town, Bear Creek Park, Town Center, or out in the newer neighborhoods off Keller Parkway. $0 service call, $75/hour labor, parts quoted before any work.
Questions from Keller homeowners
Which days can I water in Keller?
Keller holds outdoor sprinkler watering to twice a week on the days assigned to your address, with no automatic watering between 10 a.m. and 6 p.m. Hand watering, drip, and soaker hoses are allowed any time — which keeps foundation watering and new plantings legal even on an off day.
My Keller home is from the 1990s — is the sprinkler system worth repairing?
Usually yes. Most of Keller was built out from the 1980s through the 2000s, and systems from that era are generally well-planned with buried pipe that's still sound. What fails is the valves, heads, sensors, and controller — individual parts. We diagnose the actual fault and quote that part rather than pushing a full replacement.
Why does my Keller lawn seem to dry out faster than a friend's in Hurst?
It's the soil. Keller sits on the sandier Eastern Cross Timbers, while the cities to the east are on heavier clay. Sandy loam drains faster, so it heaves less — which is easier on your heads — but it dries quicker, which means watering deep on your assigned days, rather than light and often, matters more here.
Can I water my foundation in Keller during watering restrictions?
Yes. The restrictions limit automatic sprinklers, but hand watering, drip lines, and soaker hoses are allowed any day at any time. A low-flow soaker or drip line set close to the slab keeps your foundation from drying out and stays fully within Keller's rules.
Do I need a licensed irrigator to work on my system in Keller?
For anything connected to your home's water supply, Texas requires a licensed irrigator. Spray Irrigation Co. is owner-operated by Landon Melvin, Texas Licensed Irrigator LI0031476, so repairs, backflow work, and new zones are done to code and to the state's standard. A homeowner can do limited work on their own system, but the license matters the moment it ties into your potable supply or you sell the home.
What's Wrong With
Your Sprinklers?
Click the symptom that best matches what you're seeing. Landon will show you the most likely causes, what a fix typically costs, and how long it usually takes.
Select a symptom above to see likely causes and cost estimates
⚠ Diagnostic guide only · Every system is different · Final diagnosis requires an on-site visit (which is free — $0 service call)
Try a few quick checks first.
Six simple checks solve a surprising share of “nothing’s working” calls outright — or let Landon diagnose yours before he leaves the driveway. None of it is required; you can always just call.
Every common sprinkler problem.
Broken heads, failed solenoids, clogged nozzles, cracked PVC, wire breaks, controller failures — twelve repairs make up about 90% of every call, and Landon has fixed all of them many times over.
Four Steps. No Mystery.
From the first phone call to the moment Landon's truck pulls out of your driveway, here's exactly what happens — and what you pay for each step.
Call or Text Landon
(817) 993-9306 rings Landon's personal phone. Describe the problem or text a photo — he'll usually tell you what's likely wrong on the spot.
Schedule the Visit
Most non-emergency repairs are scheduled within 1–3 business days. Emergencies get same-day or next-day priority when possible.
Diagnose on Site
Landon arrives, diagnoses the problem, and quotes you a specific price in writing — parts, labor, total. You approve before anything is touched.
Fix It & Test It
The repair happens, the zone is tested, the area is cleaned up. You pay only for the time worked at $75/hr plus approved parts — nothing else.
Here's What Others Charge.
Here's What Landon Charges.
The service-call fee is the single biggest difference between Spray Irrigation Co. and most competitors in the North Fort Worth market. This isn't marketing — it's the actual billing model.
Sprinkler repair from Spray Irrigation Co. costs $75 per hour for labor, plus parts quoted before installation, with a $0 service call fee. Most single-problem repairs take 30 to 90 minutes and total between $100 and $250. Complex diagnostics or underground pipe repairs can run higher, but every part and every hour is quoted before any work begins. Compare to the North Fort Worth industry standard of $75–$150 just for the trip before anything else.
In the North Fort Worth clay-soil corridor, the most common repairs are: stuck valve solenoids (which cause zones to run continuously and spike water bills), broken or cracked sprinkler heads from lawn equipment damage, clogged rotor nozzles from sediment, wire breaks from root growth or digging, and failed controllers after summer power surges or lightning. Cracked PVC pipes also spike in March and April as the ground shifts after winter.
Yes. Landon repairs sprinkler systems regardless of who installed them originally — Hunter, Rain Bird, Toro, Rachio, K-Rain, Irritrol, or any other manufacturer. If the system has been neglected or was poorly installed, he'll give you an honest assessment of what needs to be fixed now and what can wait. There's no penalty or surcharge for working on systems installed by other companies.
Most non-emergency repairs in Keller can be scheduled within 1 to 3 business days. Active emergencies — a geysering pipe, a zone flooding the yard, a completely dead system during a July heat wave — get same-day or next-day priority. Wet Check maintenance subscribers always get priority scheduling ahead of non-subscribers.
Yes. Texas law (Texas Administrative Code §344.33) requires anyone working on an irrigation system that connects to a public water supply to hold a valid irrigator or irrigation technician license from the Texas Commission on Environmental Quality. Unlicensed "handyman" sprinkler repair is both illegal and uninsured — if something goes wrong, you have no recourse. Landon holds a current TCEQ license and carries full general liability insurance.
A broken head shows symptoms only when that zone is actively running — a geyser, a fan of water where it shouldn't be, or a dry spot where the head used to spray. A leaking valve usually shows a wet spot or running water when the zone is supposed to be off, and is the single most common cause of sudden water bill spikes. The diagnostic wizard above helps you tell them apart, or text a photo to (817) 993-9306 and Landon will call it immediately.
Cash, check, credit card (Visa, Mastercard, American Express, Discover), Zelle, and Venmo. Payment is due at completion of the job — no deposit required for standard repairs. For larger repair invoices over $500, Landon can split payment across two installments if needed; just ask.
Yes — and this is actually the fastest way to get a diagnosis. Text a photo to (817) 993-9306 showing the problem (geysering head, wet spot, valve box, controller display, whatever you're seeing). Landon will often identify the issue from the photo alone, give you an estimate of the repair cost before coming out, and sometimes walk you through a DIY fix if it's simple enough to not warrant a service call. Free and no pressure to book anything.
It happens occasionally — an intermittent issue that isn't happening the day I'm on site, or a problem with a cause I can't identify without more time. In those cases I bill only for the diagnostic time spent (typically one hour at $75) and I'm honest about what I found and what I didn't. I won't charge you for a full repair if I haven't actually repaired something, and I won't guess at a fix that might not work. If more diagnostic time is needed on a return visit, the first hour is still the only hour billed — no double-billing the same problem.
Underground repairs are the least predictable type of irrigation work because the problem might be 8 inches down or it might require finding a break in 30 feet of buried pipe or wire. Typical ranges: a single known-location PVC break runs $150–$300. A wire trace and repair (using a wire toner to find the break) runs $200–$400. A main-line break that requires excavation runs $400–$900 depending on depth and length. What I always do: before digging anything, I give you a not-to-exceed number based on what I know so far. If the work exceeds that number, I stop and recheck with you before continuing. No mystery bills.
Usually yes, but it depends on what's failing. Keller has plenty of systems from the 1990s and 2000s still running well on their original valves and heads — PVC pipe underground lasts 40+ years, good valves last 15-20, heads get replaced as they break, and controllers get upgraded every 10-15 years. A 25-year-old system showing isolated failures (one bad valve, a few worn heads, a failed controller) is still a good system — fix the failing parts, not the whole thing. A 25-year-old system with multiple simultaneous failures (main-line leaks, multiple valves dying in the same year, coverage gaps that were never right) is usually telling you it's time to plan for replacement over the next few years. I'll tell you which category yours is in honestly after looking at it.
Call Landon. No Runaround.
(817) 993-9306 is Landon's personal number. He answers himself. $0 to come out, $75/hr for labor, and an honest quote before anything is touched. That's the whole model.